I2C Gamepad Joystick Control Board with Thumb Input, 6 Integrated Controls, Selectable Device Addresses, and Cable or Header for Electronics Projects

Features: Integrated I2C Input: The onboard ATtiny816 reads the analog joystick and buttons through preprogrammed seesaw firmware, giving the host controller a unified I2C connection to the full control set. Complete Control Layout: A 10-bit analog joystick provides X and Y input alongside 6 onboard buttons for directional, action, Start, and Select controls on the same board. Flexible Bus Addressing: Address jumpers select 0x50, 0x51, 0x52, or 0x53, allowing up to 4 gamepad boards to operate on the same I2C bus with distinct addresses. Connection And Event Options: The STEMMA QT / Qwiic connector supports the stated I2C connection format, while the optional IRQ pin can report button presses and releases. Package And Setup Details: Includes 1 assembled gamepad input board with preinstalled firmware and 1 pin header set that requires soldering; a STEMMA QT / Qwiic cable is sold separately. Specifications: Size: Approx. 5.08 x 2.28 x 1.45cm / 2.00 x 0.90 x 0.57inch Weight: Approx. 8g / 0.28oz for Gamepad Joystick Expansion Board Package Includes: 1 piece Gamepad Expansion Board 1 set Pin Headers note: 1.Please allow 1-2cm errors due to manual measurement, make sure that you donot mind before you order. 2.Due to the differences between different monitors, the picture may not reflect the actual color of the item.