K1000c Full Color 2811led Light Strip Dimmer 2812 1903 Magic Light Strip Programmable Controller Sd Card

1. 32-level-65536-level grayscale control, software Gamma correction processing. 2. Support various point, line and area light sources, support various rules and special-shaped processing. 3. The controller can output a single port, with a maximum of 512/2048 pixels (DMX lamps have a maximum of 512 pixels). 4. The playback content is stored in the SD card, the SD card can store up to 32 effect files, and the SD card capacity supports 128MB-32GB. 5. The controller can be used alone or in multiple cascades. The cascade adopts the photoelectric isolation method: anti-interference and better stability. The cascade distance between two sets can reach 150 meters, and 0.5M2 pure Copper power cord. 6. The controller chip with the load can lock the loaded IC on the software, or it can not be locked on the software. The load IC can be selected by adjusting the chip buttons of the controller. This solution is more flexible and convenient. 7. The IC controller for DMX lamps has its own address writing function; in addition, with our software of 2016LedEdit-K V3.26 and above, one-key address writing function can be set. 8. Support on-board lamps to be 4-channel (RGBW) pixels, or split into single-channel pixels. 9. Enhanced TTL and 485 differential (DMX) signal output. 10. The test effects of the controller are: 1. Red, green, blue, white, and black jump; 2. Red, green, blue, white, and black gradient; 3 Red, green, blue, and white transition.