5"Color TFT LCD Car Rearview Monitor with 2 video input, works perfectly with car rearview cameras. With 2 video input port, white video cable connects to car rearview camera, the yellow one connects to DVD or VCD. When parking the car, the rearview image appears onto the screen automatically. Designed ith menu buttons,the brightness/contrast/hue/language is adjustable. Supports car DVD, VCD, camera, and other video equipment. Easy installation without damaging any parts of the car: just clip on the original mirror. Easy installation ,without damaging any parts of the car, clip on the original mirror No Audio input or output. Specifications: Screen Size: 5inch TFT 16:9 screen Display Component: Color TFT-LCD Number of Dots: 800W * RGB * 480H Video system: PAL/NTSC compatible Power supply: DC 12V Rated power consumption: 3W Operation temperature: -30~+60 Storage temperature: -40~+60 Parking Sensors: 1. Rate Voltage: 12V 2. Operating Voltage Range: 9~16V 3. Rate Current: 20~200mA 4. Detecting distance: 0.3 - 2.5m 5. Ultrasonic Frequency: 40KHz 6. Working Temperature: -40~80C 7. Display Working Temperature: -40~60C HD CCD Car Rear view Reversing Backup Parking Camera With 2 LED Lights Images Sensors: For Sony HD CCD TV System:NTSC(Default)/PAL Effective Pixels:NTSC:656(H)592(V) PAL:628(H)*586(V) Sensing Area(mm):4.9X3.7 Resolution(TV Lines):680 TV lines Min IIIumination:0.01 Lux Video Output:75 Ohm S/N ratio:48dB Lens F=1.7 mm waterproof lens Lens Angle:170 degree Operating Temperature:-30C~+75C(RH95% Max.) Storage Temperature:-40C~+85C(RH95% Max.) Wireless module for car reverse camera that enables normal reverse camera This listing is for the wireless module only.only can use one camera Take out your stock license plate light at the back of your car. Fix the camera to where the stock license plate light was. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power Connect the wireless module (transmitter) to your camera via the two cables -one plug for AV output andone plug for power Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative Connect the wireless module (receiver) to your car monitor - yellow plug for AV input. Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative You will see the images when your car is in reverse shift.