Large Building Cabling Extender with Gigabit Throughput, Wall Mount, 90W Input, and Camera Wiring Support for Remote Device Placement Multicolor

Features: Power And Data Extension: Extends a powered cable run while keeping 10/100/1000 Mbps transmission and high-power PoE support for remote camera or access point runs. 90W Device Support: Handles higher PoE loads with a max 90W design, helping installers place demanding powered equipment farther from source hardware without adding local power wiring. Ribbed Aluminum Housing: Uses an aluminum alloy body with heat dissipation fins to support consistent thermal stability in enclosed cabinets, wall boxes, and structured cabling locations. Wall Mount Installation: Built with mounting tabs for fixed placement, making the extender easier to secure along building cable routes, camera projects, or facility upgrades. Long Reach Deployment: Supports extended cable runs up to 100 m per unit and up to 500 m in a four-unit series layout for large sites that need flexible PoE expansion. Specifications: Component: Aluminum Alloy Size: Approx.11.85x2.80x2.50cm/4.67x1.10x0.98inch Power: 90W Max Quantity: 1 Set PoE Standard: IEEE802.3af/at Ethernet Interface: 1 x Gigabit PoE Port, 1 x Gigabit Uplink PD Powered Port Forwarding Mode: Store-and-Forward Address Table: 1K Switching Capacity: 2Gbps Packet Forwarding Rate: 2.976Mpps Power Supply Pins: 1/2,4/5(+), 3/6,7/8(-) LED Color: Power: Yellow; Ethernet: Green Withstand Voltage: 2kV 8/20us Operating Temperature: -20°C to 60°C Package Includes: 1 set PoE Repeater note: 1.Please allow 1-2cm errors due to manual measurement, make sure that you donot mind before you order. 2.Due to the differences between different monitors, the picture may not reflect the actual color of the item.