For Google Pixel 7 GVU6C GQML3 GO3Z5 TFT LCD Screen Digitizer Full Assembly, Not Supporting Fingerprint Identification Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution to avoid injury from glass splinters. Tip 2: Simulate testing Screen replacement is a very fragile product. We strongly suggest testing before installation. Please simulate testing by disassembling the phone, connecting the motherboard, LCD or screen, o cable, and the new replacement, then powering on to test. If the test is successful, proceed with installation. If the screen does not display, immediately. Do not force installation. We will not be responsible once the screen is installed. Tip 3: Do not over-bend cable Ensure the LCD cable is not over-bent. Bending beyond 90 degrees may cause a black display. About the product 1. LCD display and touch screen digitizer assembly replacement part 2. Replace your broken or non-functional unit with a new one 3. Restore your device to a like-new appearance 4. Complete fit and functionality 5. Each item is inspected and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed 7. Note: Does not support fingerprint identification