1. Product overview: The 360W amplifier is an amplifier with an intelligent controller dedicated to LED decoration. It adopts the current advanced light control technology; it can read the controller signal and synchronize the controller signal to achieve the same effect as the controller change without any delay. 2.Jitter phenomenon. With the controller and dimmer, the effect of synchronous change can be achieved. This product is widely used in building lighting, KTV, bars and other night venues. Mainly targeted LED products: LED colorful soft/hard light strips, LED perforated lights, LED modules, etc. 3. Technical parameters: Supply voltage: DC 5-24V, Signal input voltage: DC5-24V, Connection : common anode, Output current: Less than 10A/channel, Output power: 600W (12V) 4.RGB colorful module and supporting driver for light bar controller; Control mode: cascade synchronous control with the main controller; 5.Display mode: display synchronously with the main controller; It can be used with general group control controllers, dimmers, etc. Operation instructions; 1. Connect the load line first, then the power line; make sure that there is no short circuit between the connecting lines before powering on; see the connection diagram for the thickness of and the wiring ; 2. The signal input terminal is extracted from the output terminal of the main controller to that the wiring sequence is correct. Dimensions: 110x90x25mm Weight: 250g Material: iron colour: black Package Contents: 1 x RGB High Speed Alplifier Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.