M10 x 1.25mm Universal Motorcycle Brake Pump Hydraulic Clutch Master Cylinder for ATV Dirt BikeRed

‏139.00 ₪
ומשלוח חינם

M10 x 1.25mm Universal Motorcycle Brake Pump Hydraulic Clutch Master Cylinder for ATV Dirt BikeRed

  • מותג: Unbranded

M10 x 1.25mm Universal Motorcycle Brake Pump Hydraulic Clutch Master Cylinder for ATV Dirt BikeRed

  • מותג: Unbranded
מחיר מומלץ לצרכן: ‏239.00 ₪
מחיר: ‏139.00 ₪
החיסכון שלכם: ‏100.00 ₪ (41%)
נמכר על ידי:
‏139.00 ₪
ומשלוח חינם

במלאי

אנו מקבלים את אמצעי התשלום הבאים

תיאור

Feature:1. Standard M10 x 1.25mm thread, suitable for most motorcycles, ATVs and Dirt Bikes.2. Aluminum alloy structure, corrosion and heat resistance, sturdy and durable, without frequent replacement.3. Small size, light weight, easy installation. The upgrade from the traditional brake pump greatly improves the performance of the clutch switch.4. The fast clutch switching effect shortens your shifting time by 10 percent , which is highly practical.5. Comes with all the relevant accessories in this package, which is made to meet your needs.Specification:Item Type: Motorcycle Brake PumpMaterial: MetalPiston Size: Approx. 14mm or 0.6inFitment: Universal for motorcycle, ATV and Dirt BikeMatching Use: Suitable for matching with 14mm piston or upper pump of 14mm or moreHow to Use: 1. First, inject the brake oil pump into the hydraulic oil. There should be no air. The wire opening is very large and you can see a bubble.2. See the screw tube above, there are good screws on the tube, please do not tighten it, it is required that the screw side holes can be exposed.3. Connect the pump and the oil pipe, then raise, the oil pump oil cup, and then random pressure several times (10) processing, now wait (no movement is allowed) after 5-10 minutes, you will see if the screw hole is not tightened on it When the brake oil flows out, then lock the screw and exhaust.4. The Method For Checking The Exhaust Of Hydraulic Clutch Completely: Push the pump under the wire to the pump body, pinch the handle of the pump with your hand, and move the end of the handle about 3 cm, which is correct. (Press the handle until the pressure does not drop, about 3 cm away from the handlebar, complete the exhaust, load and debug), when loading, you must pull out all the wires, and then pull down the fixed pump again (make sure to loosen the clutch handle, the wires are all extended Out)..Package List:1 x Motorcycle Brake Pump1 x Screw Rod1 x Accessory2 x Nut
  • מזהה Fruugo: 428513679-900467675
  • EAN: 9086654257114

משלוחים והחזרות

שילוח תוך 2 ימים

  • STANDARD: חינם - משלוח בין יום ו׳ 07 נובמבר 2025–יום ה׳ 13 נובמבר 2025 - חינם

משלוח מ- סין.

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים. הצג מדיניות ההחזרים המלאה

פרטי תאימות המוצר

אנא עיין במידע התאימות הספציפי למוצר זה המתואר להלן.

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

יצרן:
המידע הבא כולל את פרטי יצירת הקשר של היצרן של המוצר הרלוונטי הנמכר באתר Fruugo.

  • Solstice & Sage
  • Shenzhen Hongyi Lighting Co., LTD
  • Room 2011, Wantong Building, No. 3002, Sunqiao East Road, Sunqiao Sub-district, Luohu District, Shenzhen City
  • shenzhen
  • CN
  • 518023
  • Charllle@163.com
  • 18776132396

האדם האחראי באיחוד האירופי:
המידע הבא כולל את פרטי יצירת הקשר של האדם האחראי באיחוד האירופי. האדם האחראי הוא המפעיל הכלכלי הממונה המבוסס באיחוד האירופי, אשר אחראי לחובות הציות הקשורות למוצר הרלוונטי הנמכר לאיחוד האירופי.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • France
  • 75004
  • infoapexchen@gmail.com
  • 33745713901