Features 1、Exquisite Workmanship: The line finder device is composed of two parts, the host and the remote test terminal, and the appearance is smooth. 2、Comfortable To Use: Cable finder is compact and has a good hand feel, easy to hold and use, and considerate humanized design. 3、Powerful Function: Cable tester has explored and tested powerful functions such as network cables, telephone cables, and video cables. 4、Fast Testing: The telephone line finder test is fast and accurate, and can help you quickly detect line problems. 5、Wide Range Of Use: Line finder is widely used in telephone systems, computer networks and other fields involving metal wire lines. Specification Item Type: Line Finder Material: ABS Model: NF-468 Battery: 6F22 1 x 9V (not included) Purpose: Network cable, telephone line detection and testing Language Version: English Testable Cables: Network cable, telephone cable, video cable Display: LED flashes Current: 25mA Test Speed: Normal, slow (adjustable) Network Test: RJ45/RJ11 Scanning Method: Automatic How to Use: 1. Twisted pair 1, 2, 3, 4, 5, 6, 7, 8, G wire pairs are tested one by one (pair), and it can be distinguished and judged which one (right) is wrong, short circuit and open circuit. 2.NF-468V can be tested: RJ45, RJ11 3. Long press the power button for 3 seconds to start the test, touch the power button again for the slow gear test, touch the power button again for the manual test, and press the power button for 6 seconds to shut down. 4. Push the side switch for lighting function. 5. The MIC USB interface next to it is the power supply interface, which can be directly powered by a power bank or other devices. Test method (take RJ45 as an example) Flashing one by one in order, as shown in the figure below: Main tester: 1-2-3-4-5-6-7-8-G Remote Test Terminal: 1-2-3-4-5-6-7-8-G If the wiring is not normal, it will be displayed as follows When a network cable such as line 3 is disconnected, the light 3 of the main tester and the remote test terminal will not be on. 2. When several wires are not connected, the corresponding lights of the main tester and the remote test terminal are off. When the network cable is less than two wires connected, the lights are off. 3. When the two ends of the network cables are out of order, for example 2, 4 lines are out of order, the display is as follows The main tester remains unchanged: 1-2-3-4-5-6-7-8-G The remote test terminal is: 1-4-3-2-5-6-7-8-G 4. When two or more network cables are short circuited, the main tester's display remains unchanged, and all the lights of the corresponding line numbers that are short circuited at the remote test terminal are not lit Package List 1 x Host(Battery Not Included) 1 x Remote Terminal 1 x Manual