Pci-e Riser Card Sata 6p Pcie Pci-e Express Adapter 1x 16x Usb3.0 Extender

Features:100% brand new and high qualityAdopts the original imported connector, and the contact between the graphics card and the connector is better.The PCI-E connector uses multi-layer shielded wire, which can be connected to a maximum of 3m without attenuating the signal.The USB cable is soft and stable, easy to route, and the graphics card can be placed at will.The adapter card has a 6PIN interface and a 12V enhanced DC-DC to enhance the power supply, so that the graphics card power supply is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected.The slot is equipped with a fixed buckle, which is more convenient to remove and fix the graphics card, and the graphics card will not fall off from the slot.100% brand new and high qualityThe graphics card power supply uses 8 solid capacitors to make the graphics card power supply more stable and safe.Package Includes:1 x PCI-E 16X Adapter1 x PCI-E 1X Riser Board1 x 60cm USB 3.0 Cable1 x SATA 15Pin-6Pin Power Cable1 x ManualSpecifications:Model: VER010-XName: PCI-E graphics card extension cableProduct performance: extension cord graphics card 6PIN interface (16A power supply capability) to enhance power supplyInterface: PCI-E 16XProduct length: 60cm/1.97ftProduct color: red card slot with red line / black card slot with black lineProduct weight: 105g/set (actual weight)Product material: MetalAccessories: 3.0USB cableColor: Black/Rednote:This extension cord is suitable for the motherboard PCI-E slot (1X 2X 4X 8X 16X) when using it, please plug in the floppy drive power cord. When plugging or unplugging the PCI-E extension cable, the computer must be disconnected and then plugged, and the precautions must be read clearly when using itBe sure to recognize the direction when plugging in, don't plug it in reverse or off position to prevent the device from being burned.SATA 15pin is a standard power supply, please check whether it is inserted in place when plugging in the power supply