Reversible PWM Motor Speed Controller DC 6-30V 6A, Forward/Reverse Switch Board, Max 10A CCM6N

1. Input voltage requirement: 10V-36VDC (wide range) 2. Maximum output power: 150W 3. The maximum continuous current is 5A, the overload short-circuit protection current is 8A, and the short-circuit time does not exceed 30 seconds 4. PWM pulse width modulation range: 0% -100% Use wiring 1. Connect the power cord, ensure that the forward and reverse switches are in the middle zero position, connect the DC power supply, ensure that the voltage range of the DC power supply is greater than 10V and less than 36V, ensure that the output power of the power supply meets the needs of the motor operation, and do not reverse the positive and negative terminals of the DC power supply, otherwise the speed controller may be 2. Connect the motor, and the motor wire can be non positive or negative 3. Adjust the switch, the forward and reverse switches are used to control the direction of motor speed. When the switch is in the zero position, the motor stops running 4. Potentiometer knob, adjusting the potentiometer knob can change the output duty cycle of the governor and the motor speed Color: As Shown Material: Metal Package Contents: 2*Controller Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.