Thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage thrust assembly. The bearings are also separable which means that mounting is simple. Thrust bearings feature ball bearings supported within a ring and are designed to primarily support an axial load. Single direction thrust bearings accommodate axial loads in just one direction, while double direction thrust bearings can locate a shaft axially in both directions. Features Consists of a shaft washer, a spherical housing washer and a ball cage assembly Suitable for high axial loads in one direction Cage material: sheet steel, high load-bearing capacity and high strength; suitable for continuous high temperatures Can be dismantled, the bearing washers and the ball cage assembly can be mounted separately Specifications Design: With plain housing washer. Bore diameter d: 8mm. Outside diameter D: 19mm. Height H: 7mm. Outside diameter shaft washer d1: 18.8mm. Inner diameter housing washer D1: 8.2mm. Chamfer dimension washer r1,2min: 0.3mm. Abutment diameter shaft damin: 14.5mm. Abutment diameter housing Damax: 12.5mm. Fillet radius ramax: 0.3mm. Basic dynamic load rating C: 3.2kN. Basic static load rating C0: 3.8kN. Fatigue load limit Pu: 0.143kN. Reference speed: 12000r/min. Limiting speed: 17000r/min. Minimum load factor A: 0.000075.