Automatically senses liquid without pressing: sensing distance is about 5 cm, and liquid is dispensed quickly within 0.26 seconds Reasonable quantitative dispensing: 1 ml per dispense, with the next dispense available after a 2-second interval Full-body waterproof design: IPX6 waterproof rating, washable body, suitable for bathroom and kitchen use Wide-bottle mouth design: wide liquid filling port allows easy refilling at any time Compatible with a variety of liquid soaps: quick and easy liquid change, suitable for different hand wash liquids Capacity: 200 ml Rated voltage: DC 6 V Power supply: 4 x AAA batteries (not included) Important Notes: 1. The soap dispenser requires 4 x AAA batteries. When installing, ensure the "+" and "-" symbols on the batteries and device are aligned correctly 2. If the dispenser does not release soap, gently press the nozzle to help the internal straw make contact and allow soap flow 3. Upon first use, activate the sensor 2 to 3 times to prime the pump and fill the straw with soap Cautions: 1. If soap is not dispensing properly, gently press the nozzle to clear any blockage 2. Refill liquid when the level is low; otherwise, the dispenser will not operate 3. Flashing light indicates low battery; replace batteries promptly 4. Do not shake the device, as this may cause damage 5. Remove batteries if the device will not be used for an extended period 6. Ensure the liquid container cap is securely closed to prevent leakage 7. This device is designed for use in bathroom and kitchen environments 8. Normal operating temperature range: 3°C to 40°C Dimensions: 70 x 94 x 188 mm Material: ABS + PC Color: Black Package Contents: 1 x Soap Dispenser 1 x User Manual Note: Light and display differences may cause slight variations between the product color in images and the actual item. Measurement may vary by +/- 1–3 cm.