Solar water tank, water tower, swimming pool automatic water level controller, plastic float valve

This valve can replace traditional float valves and is compatible with various high-level water tanks, pools, and towers in industrial and civil buildings. It automatically controls water flow, replenishes at low water levels, and automatically stops when full. It has four inlets, providing a large water output. It boasts a beautiful appearance, compact size, practicality, easy installation, requires no electricity, is convenient to use, has a long service life, low failure rate, and saves water resources. When the water level in the pool or tank drops, the valve body sinks, opening the pilot valve. With the pressure of the pipeline water, the sealing surface of the control valve opens, and water flows out, and vice versa. Specifications: Vertical, internally mounted; Working pressure range: 1-10KG (0-1-1MPa); Compatible media: Clean water; Compatible media temperature: ≤70°C; High-temperature resistant media temperature: 70°C-120°C; Outlet diameter: G1/2; Size: 100mm. 2x58x50mm Quantity: 1 piece Color: White Material: Plastic Packaging Contents: 1* Water Level Control Valve Note: This product is a liquid level control valve. During installation, the float must be vertical. If top installation is required, an elbow is needed to connect the float valve and the inlet pipe. First, fix the inlet pipe on a horizontal surface. Then, connect the automatic water level control valve to the inlet according to the standard. The main inlet should match the standard diameter of the control valve. During use, the shut-off valve should be fully open. If two valves are installed in the same pool, ensure they are on the same horizontal surface. Before installation, remove impurities from the pipes to prevent blockage. If the water quality is poor, proper valve maintenance is required. If the user finds that the water filling time is too long, adjustments can be made.