Mesh cover: Made of special single-layer metal mesh and ABS plastic, designed to accommodate different grass needle sizes. Product material: Metal mesh with anti-rust surface treatment for durability; body constructed from ABS engineering plastic. Ergonomically designed handle with comfortable grip and moderate size. Operates on 2 AA batteries (batteries not included). Higher voltage enables better upright positioning of grass needles, especially longer ones. Wiring: Positive wire (short wire), negative wire (alligator clip wire). Usage instructions: 1. Unscrew the mesh cover and fill the container with grass needles (approx. 1/3 full). 2. Tighten the mesh cover securely—ensure the positive contact inside the container makes contact with the metal mesh. 3. Apply white latex adhesive to the target surface. 4. Attach the negative contact (with plastic sleeve) adjacent to the planting area. 5. Position the mesh cover (grass exit side) 3–5 cm above the desired planting location. 6. Turn the power switch to “ON”, then press the central oval button to activate (metal mesh carries 5000V DC—do not touch during operation). 7. Release the oval button to stop operation; indicator light will turn off. Color: As shown in image. Material: ABS. Package includes: 1 × Solar panel grass planter 1 × Brush 1 × Pack of valley dark green grass needles 1 × Pack of wild east green grass needles Note: Color appearance may vary slightly due to screen settings and lighting conditions. Slight measurement variance possible.