STM32F4 Development Board, MicroPython Programming Learning Kit, STM32F411CEU6, Dual Crystal Oscillator, HID Bootloader, 3 Buttons, Type-C, Black

‏27.95 ₪
+ ‏59.99 ₪ משלוח

STM32F4 Development Board, MicroPython Programming Learning Kit, STM32F411CEU6, Dual Crystal Oscillator, HID Bootloader, 3 Buttons, Type-C, Black

נמכר על ידי:

‏27.95 ₪

חסוך ‏41.05 ₪ (59%)

RRP

‏69.00 ₪
במלאי
+ ‏59.99 ₪ משלוח

מדיניות החזרות ל-14 יום

אמצעי תשלום:

  • מותג: Unbranded

פרטי מוצר

פרטי מוצר

STM32F4 Development Board, MicroPython Programming Learning Kit, STM32F411CEU6, Dual Crystal Oscillator, HID Bootloader, 3 Buttons, Type-C, Black

STM32F4 Development Board – MicroPython Programming Learning Kit with STM32F411CEU6 This STM32F4 development board is designed for learning and prototyping, offering support for MicroPython programming. It features dual crystal oscillators: a 25MHz high-speed crystal and a 32.768KHz 6PF low-speed crystal. The V3.0 version uses a lead-free process and gold-plated pin headers for a more eco-friendly design. Reserved flash pads allow for expansion, and USBDisk & FATFS routines are provided. The board comes pre-flashed with the WeAct HID FW Bootloader (factory test version, hex not provided). MicroPython firmware is available for programming; refer to the configuration files via the link, but technical support is not included. Boards from V1.3 and above include three buttons: reset, BOOT0, and a user button. How to enter ISP mode: Method 1: With power on, press and hold both BOOT0 and reset, release reset, then release BOOT0 after 0.5 seconds. Method 2: With power off, hold BOOT0, power on, and release BOOT0 after 0.5 seconds. DFU mode: Simply connect to a computer with a data cable. If not recognized, gently warm the chip (to about 25°C) and re-enter ISP mode. Serial mode: Use a USB-to-serial adapter to connect to PA9 and PA10 on the core board. With the WeAct HID FW Bootloader, no USB-to-serial adapter, debugger, or computer driver is needed—just a Type-C data cable to complete firmware download. Press and hold the KEY
  • מזהה Fruugo: 548723506-1107271163
  • EAN: 5298106713039
בטיחות

מידע על בטיחות המוצר

אנא עיין במידע בטיחות המוצר הספציפי למוצר זה המתואר להלן

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

תוויות בטיחות למוצר

CE Mark
אזהרות בטיחות: Do not let your children touch this product alone to avoid swallowing or other injuries

פרטי תאימות המוצר

אנא עיין במידע התאימות הספציפי למוצר זה המתואר להלן.

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

יצרן:
המידע הבא כולל את פרטי יצירת הקשר של היצרן של המוצר הרלוונטי הנמכר באתר Fruugo.

  • Wuxishijunchuangdianzikejiyouxiangongsi
  • Wuxishijunchuangdianzikejiyouxiangongsi
  • dongtingjiedao,zijinglu1-14, xishanqu
  • Wuxi
  • CN
  • 214000
  • [email protected]
  • 15716205335

האדם האחראי באיחוד האירופי:
המידע הבא כולל את פרטי יצירת הקשר של האדם האחראי באיחוד האירופי. האדם האחראי הוא המפעיל הכלכלי הממונה המבוסס באיחוד האירופי, אשר אחראי לחובות הציות הקשורות למוצר הרלוונטי הנמכר לאיחוד האירופי.

משלוח

מְסִירָה

שילוח תוך 2 ימים

  • STANDARD: ‏59.99 ₪ - משלוח בין יום ב׳ 23 נובמבר 2026–יום ו׳ 27 נובמבר 2026

משלוח מ- סין.

החזרות

החזרות

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים.

הצג מדיניות ההחזרים המלאה