TICFOX WS55-220 DC 48V 500W CNC Brushless Spindle BLDC Motor Driver Controller

‏199.00 ₪
ומשלוח חינם

TICFOX WS55-220 DC 48V 500W CNC Brushless Spindle BLDC Motor Driver Controller

  • מותג: Unbranded

TICFOX WS55-220 DC 48V 500W CNC Brushless Spindle BLDC Motor Driver Controller

  • מותג: Unbranded
מחיר מומלץ לצרכן: ‏249.00 ₪
מחיר: ‏199.00 ₪
החיסכון שלכם: ‏50.00 ₪ (20%)
נמכר על ידי:
‏199.00 ₪
ומשלוח חינם

במלאי

אנו מקבלים את אמצעי התשלום הבאים

תיאור

Features WS55-220 is a high performance,cost-effective 3 phase BLDC motor controller.Voltage range is from 20VDC to 50VDC. The controller can drive the DLDC motor with HALL or without HALL. The driver is based on advanced technology and be provided with high speed, high torque, low noise, low vibration, over current protection, overload protection, less phase line. protection, phase line short protection, alarm output, speed signal output. This controller can be used in small equipment, Electric Power Tools, exhaust Fan, Jade grinding machine, Vibrating motor etc. External potentiometer control/external voltage control.With overvoltage protection, over-current protection, locked-rotor protection. Specifications:Rated voltage: 20 to 50 VDC Rated current: 12A Current limiting: 15AMaximum speed: 20000RPM( the specific speed depends on the motor itself and load)Storage temperature: -20℃~+65℃ Usage environment: Avoid direct contact with dust, fumes and corrosive gases Temperature: 0-45℃ Humidity: < 80%, no frost, frost free Shock: 5.9m/S2 Maximum Storage humidity: 0~95%RH Size: Approx. 9.5 x 6 x 3.5cm / 3.74 x 2.36 x 1.38inch Weight: 258g Detail:1.Two modes of speed regulation: External potentiometer: through this potentiometer speed regulation; External voltage: external 10VDC voltage speed regulation; Note: The two speed regulation can not be used simultaneously2. Speed output PG signal: There is a 5v-revolution pulse output between the port and the ground. The output frequency is set to P (Hz), the motor class logarithm is N, and the speed is F (RPM), then the output speed frequency is P=F*N/60. 3. Alarm output ALM signal:There is an 5V alarm pulse output between the port and the ground. 4. Positive inversion function:F/R:Fiddle the toggle switch on the corresponding side, the motor steering direction can be changed. For the toggle switch, the white part is up and down, then twang it up and down. For the toggle switch, the white part is horizontal, and the twang horizontally. Package included:1 x Motor Driver Controller with cable Note:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Package List
  • מזהה Fruugo: 397644258-848044991
  • EAN: 9789622485075

מידע על בטיחות המוצר

אנא עיין במידע בטיחות המוצר הספציפי למוצר זה המתואר להלן

המידע הבא מסופק על ידי קמעונאי צד שלישי עצמאי המוכר מוצר זה.

תוויות בטיחות למוצר

CE Mark
אזהרות בטיחות: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
מרכיבים: As shown in the figure

משלוחים והחזרות

שילוח תוך 2 ימים

  • STANDARD: חינם - משלוח בין יום ד׳ 08 אוקטובר 2025–יום ג׳ 14 אוקטובר 2025 - חינם

משלוח מ- סין.

אנו עושים כמיטב יכולתנו להבטיח שהמוצרים שאתם מזמינים יישלחו אליכם במלואם ובהתאם למפרט שלכם. עם זאת, אם תקבלו הזמנה חלקית, או פריטים שונים מאלו שהזמנתם, או שיש סיבה אחרת לכך שאינכם מרוצים מההזמנה, באפשרותכם להחזיר את ההזמנה, או כל אחד מהמוצרים הכלולים בהזמנה, ולקבל החזר מלא עבור הפריטים. הצג מדיניות ההחזרים המלאה