Universal Garage Door Opener Remote 26-27

【Garage Door Remote]】433Mhz Universal Wireless Remote Control. This product is a , not an original accessory, it is used to duplicate other remotes. Strong signal, can go through floors, walls, doors, etc., and can be controlled within 50 metres distance in an open area. 【Applicable Codes】2260, 2262, PT2264, 5326, SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, 527, 1527, 2240, HCS101, SMC918 series, HCS200 HCS201 (part of the code), HCS300 HCS301 (part of the code), different chip makers have different prefixes to the chip model, chip models are the same can 【Reset Method】Press and hold the "A" and "B" keys at the same time --- the LED will blink 3 times. Then release the "B" key (while the "A" key remains pressed) and click the "B" key 3 times - the LED will blink and then go out. The data is cleared successfully. 【Programming Method】 1. Place the original remote control and the clone remote control in the "back-to-back" position or zero distance and place them side by side. 2. Press and hold a key on the original remote control, and then press and hold a key on the clone remote control. Press and hold until the LED blinks 2 times (Note: LED blinks 2 times means do not release the button) then blinks 3 times and stabilises, you have successfully cloned, the other buttons operate in the same way. 【Wide Application】The remote control can be used in factories, offices, homes, supermarkets, farms, laboratories and so on. You can use copy remote control to clone multiple remotes. Such as garage doors, electric doors, rolling doors, retractable doors and electric curtains. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-RUIMINGZ store