This is a single outlet washer pump designed for windshield cleaning. The washer pump is located at the bottom of the washer fluid reservoir, typically positioned low on the vehicle. Access to the washer pump may require partial removal of the inner wheel arch or bumper trim. The pump is push-fitted into the washer bottle. Washer hoses are push-fitted onto the pump. Some models may include a release clip. If the hoses are difficult to remove, gently heat them with a hair dryer to ease removal. Avoid operating the washer pump dry, as this may lead to failure. Use windshield washer fluid according to manufacturer recommendations to reduce the risk of freezing. Do not add antifreeze directly to the washer fluid reservoir. Always fill with windshield washer fluid first, then top up with water if necessary. Item Specifications: Condition: New Manufacturer Part Number: 76846-TA0-A01 Interchange Part Number: 76846TA0A01 Type: Windshield Washer Pump Fitment Type: Direct Replacement Voltage: 12V Connector: 2 Pins Color: White Material: Plastic Fitment: Honda Accord 2008–2011 (For Japan Market) Honda Accord 2012 (For Japan Market) Acura TSX 2009–2013 (For Japan Market) Package Contents: 1 x Washer Pump 1 x Rubber Grommet Note: Light reflection and display settings may cause slight variations between the product color in images and the actual item. Measurement may vary by +/- 1-3 cm. Only the items listed are included; additional accessories are not part of this package.