X500 HUD GPS Navigation Display Car Projection Speedometer Condition: Item Type: HUD Navigation Display Material: ABS Color: BlackSize: Approx.2.6x13.6cm/1.02x5.35inFitment: 12V USA cars USA Made after 2000.01.01 12V Asian cars manufactured after 2009.01.01 How to Install: The vehicle's OBD position is generally the one shown in the figure. Tips: The Bluetooth HUD will automatically start after the vehicle is on, and the vehicle will automatically turn off after the vehicle is off. Some vehicles may be delayed from 3 to 5 minutes. 3. Attach the HUD to the soft rubber base first, or attach the base with the attached glue to secure it. 4. Place the HUD on the instrument panel, select a position where the information on the screen is clearest, and confirm this position. 5. Open the downloaded Anavi navigation software, click on the HUD in the upper left corner for Bluetooth connection, the software will automatically scan to cxat BT, click to connect to the HUD host. After the connection is successful, the connection will be made automatically afterwards. 6. HUD parameter setting: Click the setting icon in the lower right corner to Enter the setting function, and then click HUD setting to enter the setting. 7. Download the map offline. Click the settings icon in the lower right corner to enter the settings feature, then click the Offine map to enter the offline map download. Select the country and region you need to download the offline map e it.